Once you have finished selecting your specific software versions and revisions, communications software, and clocks; this window lists the various Procedures to be taken to deal with the Daylight Saving changes. Please note that your specific choices must be used to obtain the correct steps.
See the Microsoft link for "Preparing for Daylight Saving Time Changes". Confirm that Windows is updated to the latest Daylight Saving Time update and be sure that your operating system has Daylight Saving Time enabled. It is also imperative that your computer is set to the correct Time and Date, prior to the Daylight Saving Time change.
Below wherever you see the phrase "download manually", you may substitute a memorized job scheduled to run daily at the appropriate time. Because some computers gradually gain or lose time, it is imperative that unless you sync time with the computer performing the download; you must periodically ensure the computer has the correct date and time prior to the download. This will prevent the computer from sending the incorrect date and time to the clocks.
Select the items you wish to examine:
PRE-Daylight Saving Updates
Version 10 -
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" and "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks; and TMC clocks, after each Daylight Saving time change (twice per year).
Version 9.0 (Rev. 11/05/06 and older) -
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" and "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; NCR clocks; and TMC clocks, after each Daylight Saving time change (twice per year).
Version 8.1.1 (Rev. 11/05/06 and older) -
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" and "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
Version 8.0/Version 8.1 (Rev. 02/06/07 and older) -
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" and "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
If using CMDRVW32, install the updated TTComm32.EXE and rename it to CMDRVW32.EXE in the TimeTrak® program folder.
POST-Daylight Saving Updates
Version 10 -
Turn on "Use Daylight Saving" in "Pay Rule > Miscellaneous".
Set the correct Daylight Saving Times and Dates. You must run version 1.1.0.0 or newer, of TTClockHost, or TTClockComm. Flash the BIOS of the CMI Clock to 252-011M Firmware.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks, after each Daylight Saving time change (twice per year).
TMC Clocks should work smoothly with this revision and newer.
Version 9.0 (Rev. 01/18/07 16:51 and newer) -
Turn on "Use Daylight Saving" in "Pay Rule > Miscellaneous".
Set the correct Daylight Saving Times and Dates. You must run version 1.1.0.0 or newer, of TTClockHost, or TTClockComm. Flash the BIOS of the CMI Clock to 252-011M Firmware.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
TMC Clocks should work smoothly with this revision and newer.
Version 9.0 (Rev. 11/06/06 09:39 to Rev. 01/17/07 23:59) -
Turn on "Use Daylight Saving" in "Pay Rule > Miscellaneous".
Set the correct Daylight Saving Times and Dates.
You must run version 1.1.0.0 or newer, of TTClockHost, or TTClockComm. Flash the BIOS of the CMI Clock to 252-011M Firmware.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; NCR clocks; and TMC clocks, after each Daylight Saving time change (twice per year).
Version 8.1.1 (Rev. 11/06/06 09:39 and newer) -
Turn on "Use Daylight Saving" in "Pay Rule > Miscellaneous".
Set the correct Daylight Saving Times and Dates.
You must run TTClockHost version 1.1.0.0 or newer, or TTClockComm. Flash the BIOS of the CMI Clock to 252-011M Firmware.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
Version 8.1 (Rev. 02/07/07 09:59 and newer) -
Turn on "Use Daylight Saving" in "Pay Rule > Miscellaneous".
Set the correct Daylight Saving Times and Dates.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
If using CMDRVW32, install the updated TTComm32.EXE and rename it to CMDRVW32.EXE in the TimeTrak® program folder.
Serial Comm Drivers
TTClockComm -
Turn off "Use Daylight Saving" in "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102 clocks, after each Daylight Saving time change (twice per year).
Serial Comm Driver (TTComm32.EXE) -
This Serial Comm Driver will NOT work with the RSI E-Series HP-R Clocks; instead use the CMDRVW32.EXE driver.
This Serial Comm Driver will work with the RSI F-Series Clocks.
Download the updated TTComm32.EXE and click the Use TTComm32 checkbox in Clock Communications.
Turn Off "Use Daylight Saving" time in "Basic Programming" for ATS Serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
Windows Comm Driver (CMDRVW32.EXE) -
Turn off "Use Daylight Saving" in "Basic Programming".
Download updated configuration to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks.
Download the corrected Time/Date manually to ATS serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; and NCR clocks, after each Daylight Saving time change (twice per year).
Use updated TTComm32.EXE instead of CMDRVW32.EXE. For TimeTrak® version 8.0/8.1, rename the updated TTComm32.EXE to CMDRVW32.EXE in the TimeTrak® program folder. NOTE: If you have RSI E-Series HP-R Clocks, do NOT perform the rename step. Instead use the CMDRVW32.EXE driver.
TCP Servers
TTClockComm -
Turn off "Use Daylight Saving" in "Basic Programming" (Clocks) for ATS TCP clock models 2000, 5000 and 2102 clocks.
Download updated configuration to ATS TCP clock models 2000, 5000 and 2102.
Download the corrected Time/Date manually to ATS TCP clock models 2000, 5000 and 2102, and BIO Clocks, after each Daylight Saving time change (twice per year).
TTClockHost -
Update to TTClockHost version 1.1.0.0 or newer.
Turn off "Use Daylight Saving" in "Basic Programming" (Clocks) for ATS TCP clock models 2000, 5000 and 2102; and NCR clocks.
Download updated configuration to ATS TCP clock models 2000, 5000 and 2102.
Download the corrected Time/Date manually to ATS TCP clock models 2000, 5000 and 2102, and BIO Clocks, after each Daylight Saving time change (twice per year).
TTCommServer -
Turn off "Use Daylight Saving" in "Basic Programming" (Clocks).
Download updated configuration to clocks.
Download the Time/Date manually to clocks, for each Daylight Saving Time change (twice per year).
TCPServer 2.x -
Turn off "Use Daylight Saving" in "Basic Programming" (Clocks).
Download updated configuration to clocks.
Download the Time/Date manually to clocks, for each Daylight Saving Time change (twice per year).
TCPServer 1.x -
Turn off "Use Daylight Saving" in "Basic Programming" (Clocks).
Download updated configuration to clocks.
Download the Time/Date manually to clocks, for each Daylight Saving Time change (twice per year).
ATS Clocks (Serial Clocks 100, 2000, 3000, 3500, 3600, 5000 and 3102; & TCP Clocks 2000, 5000 and 2102) -
Turn off "Use Daylight Saving" in "Basic Programming".
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" (Calcs) for TimeTrak® v8.0/8.1 prior to revision 02/07/07, TimeTrak® v8.1.1 prior to revision 11/06/06, or TimeTrak® v9.0 prior to revision 11/06/06.
Download updated configuration and the Time/Date manually to ATS Serial clock models 100, 2000, 3000, 3500, 3600, 5000 and 3102; for each Daylight Saving Time change (twice per year).
Download updated configuration and the Time/Date manually to ATS TCP clock models 2000, 5000 and 2102; for each Daylight Saving Time change (twice per year).
BIO Clocks -
Update to TimeTrak® v8.1.1 or v9.0 with a revision date of 11/06/06 at 09:39 or newer.
Update to TTClockHost version 1.1.0.0 or newer.
Download the updated Time/Date manually to BIO clock(s), for each Daylight Saving Time change (twice per year).
CMI 2016 Clocks -
Update the CMI 2016 Clock firmware to 252-011M by flashing the BIOS.
Update to TimeTrak® v8.1.1 or v9.0 with a revision date of 11/06/06 at 09:39 or newer.
Turn on "Use Daylight Saving" in "Basic Programming".
Download the updated configuration to the CMI clock(s).
Download the updated Time/Date manually to CMI clock(s), for each Daylight Saving Time change (twice per year).
Each year the CMI 2016 Clocks must receive a download after the first of the year and before the Daylight Saving Time changes.
NCR Clocks -
Turn off "Use Daylight Saving" in "Basic Programming".
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" (Calcs) for TimeTrak® v8.0/8.1 prior to revision 02/07/07, TimeTrak® v8.1.1 prior to revision 11/06/06, or TimeTrak® v9.0 prior to revision 11/06/06.
Download the updated configuration to the NCR clock(s) .
Download the updated Time/Date manually to NCR clocks, for each Daylight Saving Time change (twice per year).
RSI E-Series HP-R Clocks -
The RSI E-Series HP-R clocks are not compatible with the Daylight Saving Time changes for 2007.
The RSI E-Series HP-R clocks are also not compatible with TTComm32.EXE or TTClockComm communication drivers.
To communication with these clocks you must use the CMDRVW32.EXE driver.
Turn off "Use Daylight Saving" in "Basic Programming".
Turn off "Use Daylight Saving" in "Pay Rule > Miscellaneous" (Calcs) for TimeTrak® v8.0/8.1 prior to revision 02/07/07, TimeTrak® v8.1.1 prior to revision 11/06/06, or TimeTrak® v9.0 prior to revision 11/06/06.
Download the updated configuration to the RSI E-Series HP-R clocks .
Download the updated Time/Date manually to the RSI E-Series HP-R clocks, for each Daylight Saving Time change (twice per year).
RSI F-Series Clocks -
Update to TimeTrak® v8.1.1, or v9.0 with a revision date of 11/06/06 at 09:39 or newer.
After confirming the correct Times and Dates for the Begin and End of the new Daylight Saving Time Settings, download the updated configuration to the RSI F-Series Clocks.
Each year the RSI F-Series Clocks must receive a download after the first of the year and before the Daylight Saving Time changes.
TMC Clocks -
The TMC Clocks are NOT compatible with Versions of TimeTrak® prior to version 9.0.
Update to TimeTrak® v9.0 with a revision date of 01/18/07 at 15:51 or newer.
After confirming the correct Times and Dates for the Begin and End of the new Daylight Saving Time Settings, download the updated configuration to the TMC Clocks. The TMC clocks should function normally if the correct dates are sent to it via TimeTrak®.
Each year the TRAX Family Clocks, including EnTRAX Clocks, must receive a download after the first of the year and before the Daylight Saving Time changes.